Procedures for drawing workers and printers

Blueprinter

1. The switch must be energized in the prescribed sequence when starting up. Before working, check whether the lamp, pressure regulator, motor, exhaust fan, etc. are operating normally. If problems are found, they should be repaired in time, otherwise they are not allowed to be used. Live operation is strictly prohibited during maintenance.

2. During the work of the photo printing machine, the power supply and voltage should be adjusted at any time, and never exceed the rated value.

3. When the door of the photo printing machine is opened, do not look directly at the stone lamp. If you really need it, you must wear protective glasses to prevent electro-optical injuries.

4. After entering the picture box, turn off the fan, turn on the ammonia or ammonia water, and heat the electric furnace. After the drawings are smoked, immediately close the ammonia valve and the electric furnace. It is strictly forbidden to bake the drawings yellow smoked paste.

5. The ammonia cylinder must be placed in a cool place, not near the power supply or in a place where it is exposed to sunlight to prevent the gas from expanding and causing an explosion.

6. Before leaving work, check whether the ammonia valve, electric furnace switch and smoke box door of the smoke room are closed, and cut off the main power of the room.

Printer

1. During the operation of the machine, it is strictly forbidden to dip your body into the machine. When it is covered with glue, it must be stopped to pick it up.

2. When the machine breaks down, it must be stopped immediately to cut off the power supply.

3. Inflammable materials such as sleeve grease, ink, paper, etc. should be properly stored to prevent fire.

Recently, PET Blister Packaging Tray becomes more and more common use for protecting the products. This blister tray has many designs, color and thickness which can be customized by your demands in order to differentiate from other brands in the stores.

 

PET Blister Packaging Tray is low cost, recycled, and easy to hold products. With our more than 14 years` experience, we can suggest low cost and well protected design for our customers.

 

Since our customers are high end, we know what kind of blister the market wants better than other printers. Therefore, we can always suggest the most fashion design for our customers.

PET Blister Packaging Tray

PET Blister Packaging Tray,Blister Pack Packaging,Plastic Tray,Clear Plastic Packaging

ShenZhen YaoLong Colour Printing Co., LTD. , https://www.ylprinting.com