Classical furniture into the market new favorite experts to support classical furniture maintenance诀窍

Compliance with wood furniture should be in accordance with the wood, that is, the "temper" of furniture: in summer, it often rains, furniture should be placed in the window, so as not to be damp in the rainy weather, damage the surface, damage the cockroach. In the winter, every household in the north is heated, and people are very comfortable from the heating, but the furniture is far away from the heating, so as to avoid excessive shrinkage of the wood due to excessive temperature, resulting in cracking.

Many furniture are also afraid of the wind, especially the furniture with the face, such as tables, cabinets and other furniture, affected by the shrinkage and shrinkage, blowing at the tuyere for a long time is easy to crack, warp.

There is a case called a partition strip to prevent the case from falling down. The case is very long, thick and heavy. Its case is not integral with the leg, but is detachable. The north is commonly known as "a piece of jade", and the south is called "stalk plate". It is popular in the late Qing Dynasty. People generally use it to put a cumbersome self-timer or mountain bonsai.

Because the items on the case are very bulky, the pressure on the case is very high. The two ends of the case are supported by the leg of the case, so it is not too difficult, but the middle of the case is suspended. If there is a long time, there is a danger of collapse. In order to avoid this phenomenon, the case should be turned over every 1 year or half a year, and the slightly curved face will be restored by changing the direction of the force.

Southern furniture is painted to prevent moisture because the southern climate is humid, and in order to prevent moisture, the surface of the furniture is basically covered with a thin layer of lacquer. Su Zuo furniture is characterized by lacquering both inside and outside, and it is protected inside and outside. Guangzuo furniture also paints a layer of paint. Painting is difficult for the average person, so you can ask a professional to do it. Beijing-made hardwood furniture is not painted, only a layer of wax on the surface. Because the northern climate is dry, there is no need to paint, and after the wax is waxed, the furniture will be repeatedly rubbed after a long period of use, and the surface wax will seep into the wood, oxidize and produce a pulp. The surface of the furniture that has been formed into a pulp can not be boiled by boiling water, nor can it be stained with a very soluble liquid, such as gasoline, which would damage the patina.

How to maintain the desktop?

There is a saying that is good: "The cold table can't make hot tea." This sentence can be said to conform to the wood, because the ambient temperature of the stored furniture can not be suddenly cooled. For example, furniture with stone surfaces (such as tables, screens, etc.) should not be placed outdoors in the winter, nor in the summer in the sun to avoid cracking.

The oil on the table can be wiped with alcohol. If there is no alcohol, it can be wiped with high-alcohol. This is a common method used by older Beijingers.

Keeping dry and coping with the seasons in the changing seasons, the maintenance of furniture is extremely particular. For example, after the volatility, spring and autumn, etc., the climate will change from tide to dry or from dry to wet. The cabinet door should be opened and the drawers should be opened in time to make the furniture inside and outside synchronize with the wind, so as to avoid warping due to too dry or too wet. However, when the wind is too cold, the furniture should not be exposed to the sun or the tuyere, and should be placed in a cool, dry place. Because excessive sunlight can damage the material of wooden furniture and cause cracking or warping of the wood, try to ensure that the furniture is not exposed to the sun while keeping it moderately dry.

Waxing makes the furniture shiny. If it is used for a long time, the gloss will gradually disappear and affect the appearance. It should be noted that waxing should be carried out after the dust has been completely removed, otherwise wax spots will form or scratches will occur. When waxing, it is necessary to master the principle of shallow to deep, from point to surface, step by step, and evenly wax.

Dongguan Kangta plastic Hardware products Co., Ltd is founded in 2008, specialized in design and manufacture O Bag and other EVA Foam custom products.

The kids' toys made by EVA foam injection can be very light and soft touch, of course, eco-friendly to human being and environment. Kangta factory focus on EVA foam IP injection products since 2008, the main products are Obag Bags, EVA Foam Toys, Tablet Cases etc. 

Dongguan Kangta plastic Hardware products Co., Ltd is founded in 2008, specialized in design and manufacture O Bag and other EVA Foam custom products.

Eco Toys

EVA Foam Toys

EVA Foam Toys, EVA Foam Sword, EVA Football, Kids Toys For Boys

Dongguan KangTa Plastic Hardware Products Co., Ltd. ,