Shanghai Xinzhuang Instrument CO2 incubator water jacket heating is to maintain a constant temperature through a separate water jacket to surround the internal tank. The advantage: water is a good thermal insulation material, when it encounters power failure The water jacket system can maintain the temperature accuracy and stability in the incubator for a long time, which is beneficial to users who are not stable in the experimental environment and need to maintain stable culture conditions for a long time. The gas-sleeve heating is to directly heat the inner tank through the heaters in the gas jacket of the tank, and is also called direct heating on six sides. Compared with the water jacket type, the gas-sleeve type has the characteristics of quick heating and rapid recovery of the water-type incubator, which is particularly advantageous for short-term cultivation and the need for frequent switching of the door. In addition, the air-sleeve design is simpler for the user than the water jacket.
Maintaining a constant temperature in the CO2 incubator is an important factor in maintaining healthy cell growth, so an accurate and reliable temperature control system is an integral part of the incubator. In order to make the incubator work more stably, we recommend that users choose a carbon dioxide incubator with independent triple temperature control functions, namely temperature control inside the box, over temperature alarm control and ambient temperature monitoring.
Precautions for use 1. Close the door of the incubator to prevent gas leakage and affect the test results;
2. After the refrigeration system stops working, wipe the working chamber and the glass observation window with a soft cloth;
3. Before each stop, each control switch should be in the non-working state to cut off the power;
4. The carbon dioxide incubator should be placed on a flat surface, and the environment should be clean and tidy, dry and ventilated;
5. Do not adjust the pressure of the inflowing gas to an excessive level to avoid breaking the pipeline and damaging the detector;
6. Before using the instrument, each control switch should be in non-working state, and the speed control knob should be placed in the minimum position;
7. Proper use and attention to the maintenance of the instrument, so that it is in good working condition, can extend the life of the instrument;
8. Not applicable to the cultivation of articles containing volatile chemical solvents, low concentrations of explosive gases and low ignition gases, and toxic substances.
9. Keep the air in the incubator clean and disinfect regularly; always pay attention to the amount of distilled water in the distillation tank to keep the relative humidity inside the tank while avoiding evaporation of the culture solution;
10. During continuous operation, the instrument should be inspected regularly every three months; check for water droplets, dirt, etc. falling into the motor and exposed refrigeration components; clean the compressor, the dust and dirt on the condenser; Fuses, control elements and fastening screws.
Shanghai Xinzhuang Experimental Instrument Co., Ltd. specializes in the production of constant temperature shaker, low temperature water tank, water bath constant temperature oscillator, gas bath constant temperature oscillator, shaker, incubator and other related instruments. The factory has strong technical strength and various technical indicators are leading domestically.
Cellos
High Grade Flamed Cello,Solidwood Student Cello,Oil Varnish Antique Cello,Hand Craft Advanced Cello
Queshan Wahyo Violin Ltd , https://www.wahyoviolin.com