Foreign linear high-speed wireless binding production line
Taking hot-melt glue machine or hot-melt glue as the main adhesive material, its composition can have different forms, the most common of which is composed of collating machine, wireless perfect binding machine, three-sided book cutter and stacking book collector. At the terminal of the perfect binding machine, a windmill drying device is installed vertically to dry the back of the book. According to the needs of production, it is also possible to add any assembly unit in the production line; when the book block needs to be inserted, an inserter can be added between the book cutter and the book collector. In short, the machine is more flexible and can adapt to various production needs.
The process flow of the linear high-speed wireless perfect binding production line: the book block is matched with the collating machine. During the climbing process, the book block is turned into the back of the book, and the collated book blocks are milled on the perfect binding machine. Brushing, gluing, wrapping, and pressure forming, all these processes take place in a straight line. The single book after the book is formed enters a vertically rotating windmill-type drying wheel for drying. The dried book enters the three-sided knife cutter. The cut book is counted and the finished product is fed into the conveyor belt. Outside the production line.
Foreign automatic wireless binding production line
The binding part of the fully automatic wireless binding production line is disc-shaped, with hot melt adhesive as the adhesive. Its main mechanism is composed of a collating machine, a disc-type binding machine, a three-sided book cutter and a stacking book collector. It is suitable for binding books and brochures in large and medium-sized printing factories.
Process flow of production line
The matched book blocks are climbed up the slope and turned over. After colliding for the first time, the photoelectric detection device performs folding and proofreading at station 4 to remove book blocks with more posts and fewer stickers. After the second collide of the qualified book blocks, the book block is clamped by the book binder of the perfect binding machine, the book block is clamped by the book holder of the perfect binding machine, and milling and punching are performed on the disc-type binding machine Processing such as wool, positioning adjustment, gluing and sticking yarn card, cover, press molding. After the cover-wrapped books are sent to a horizontal dryer for cooling and drying, the single wireless bound book is sent to the three-sided cutter by the conveyor belt, and the three-sided cutting is performed. After counting and stacking, the books are sent out by the conveyor belt.
There are two additional components on the production line:
â‘ Book sideways. When wire binding is required, double-saw wire binding can be performed on book blocks with a thickness of less than 19mm. At this time, the book block can no longer be milled and roughened, and the cover of the plastic package can be directly brushed;
â‘¡ If you need to lock the line, you can output loose book blocks, which expands the use of the production line.
Cold Laminating Film,Lamination Sheet Roll,Laminating Film Roll,Self Adhesive Laminating Roll
Dongguan zuncheng paper plastic material co. LTD , https://www.zcadhesive-label.com