Maintenance of Kyushu Space Analytical Gas Detector
1.1 Notes
â—†. The detector has been strictly calibrated before leaving the factory. Please do not replace the components after installation. If you want to replace it, you must recalibrate it.
â—† The sensor's sensor life is two years under normal conditions; its service life may be reduced due to different use environment, and it should be tested and maintained regularly every year;
â—†. The detector sensor prohibits the impact of high concentration gas, otherwise it may damage the sensor;
â—†. Avoid frequent power off of the detector, frequent power failure will lead to unstable operation of the detection component;
â—† During the use process, it is necessary to regularly check whether the instrument works normally, and the inspection cycle is at least once every three months.
1.2 Analysis and elimination of common faults
â—† The alarm system is installed. After the first power-on and warm-up, there may be an alarm or a fault phenomenon. At this time, the system can be reset and observed for a period of time.
â—† The power indicator is off.
Whether the power cord of the product is connected correctly, whether the power supply is 24V, and re-power on to see if it is lit. If the connection is normal, please contact the factory and return to the factory for testing.
â—† The host has no display after the power is turned on.
Gas Deep Fryer,Steel Gas Deep Fryer,Commercial Gas Fryer,Steel Gas Fryer
Jiangmen T2grand Stainless Steel Kitchenware Factory , https://www.yapamit.com