Plastic film cap cutting device

【Patent Name】 Plastic film cap cutting device 【Applicant】 Zheng Kaijin [Inventor] Zheng Kaijin [Address of Principal Applicant] 318020 No. 156 Huangchang Road, Huangyan District, Taizhou City, Zhejiang Province [Application Number] 200420114277.9
【 Application Date 】 2004.12.13
[Verification notice number] 2761535
【 Validation announcement date 】 2006.03.01
[Main classification number] B65D51/22(2006.01)I
[Classification] B65D51/22(2006.01)I
【Sovereignty Items】 1. Membrane cutting device for plastic bottle caps, a bottle cap made of plastic material injection, characterized in that the top edge of the bottle cap (1) is provided with a raised ring (2), in the raised The cap (6) is formed on the bottle cap in the ring (2), and the protrusion has a flared corner (5) and a sharp mouth (4).
[Instructions CD-ROM] D0609-1
【Abstracts】 A plastic bottle cap slitting device, a bottle cap made of plastic raw material injection, characterized in that the top edge of the cap has a raised ring, on the bottle cap in the raised ring The fins are formed and the heads of the fins are formed with jagging angles and a sharp mouth. The utility model has a ring and a tab at the top of the bottle cap. When using, the bottle cap is firstly screwed out, the bottle cap is turned over, the top is down, and the tab is pressed downwards against the sealing aluminum film of the bottle. ,Pricking the aluminum film by the protruding corners of the tab, then turning the bottle cap, making the tab sharp (sharp as a knife), cutting the aluminum film, easy to operate, fast, easy to open the cans, when not in use, the tabs from the ring Protection does not hurt your hands.
【 Agency 】 Zhejiang Hangzhou Jintong Patent Office Co., Ltd. [Agent] Chen Xiangqun Wang Guanming