There are several ways to dry glass after printing.

There are several ways to dry glass after printing.

After printing, glass products are dried differently from other substrates by two methods, namely, natural drying and forced drying. Natural drying is to place the printed glass product in a proper place and allow it to dry naturally. Because of the different conditions of air temperature and air circulation, the speed of drying is also slow, sometimes to speed up drying, and it can also be dried by cold and warm air. After the glass products are printed, they must be fully dried before firing. The firing temperature should not exceed 120 °C. And the firing temperature should be gradually increased from low to high. This must be noticed.
When printing in high-volume multicolor glass products, forced drying methods are often used. The most commonly used is electrothermal drying. For multi-color printing, dry one time for each color of India. After four colors are printed, it can be fired. The firing temperature cannot exceed

Vertical Blinds

Vertical Blinds Shape will be different with fauxwood venetian blinds, The width can be make it to 5 Meter, There are two open operate style, for the small window that you can choose single open operate style vertical blinds, for the large window that you can choose double open operate way style. you can just open one side, another side you can close when you don't want to the sunshine through into the full house. it is not only safety, but also operate convenience. In the Summer, make the house more cool, In the winter, make the room more harmony.

Vertical Blinds

Chain Control Vertical Blinds,Cordless Vertical Blinds,Wand Control Vertical Blinds,Printed Vertical Blinds,White Pvc Vertical Blinds

Dongguan Xindayuan Window Covering Products Co., Ltd. , http://www.xyndaxchina.com