With the deformation of the frame, the wearer may appear confused, visual deformation, dizziness, visual fatigue, and so on, so the need for regular adjustments to the glasses. So how to adjust your glasses frame at home? Because each person's face, nose, and ears are not in the same relative position, the glasses must be adjusted according to the individual's characteristics in order to fit tightly and comfortably, but not to oppress the nose and ears, and to wear glasses. There is no tenderness at the point of contact, and it is appropriate that the frame does not slide down. Due to the limited equipment in the home, the choice of the dryer can be replaced by a hair dryer and warm water instead of the first case: After the mirror is worn, the width of the frame is not suitable for the head, and the external frame opening angle can be adjusted.
The adjustment method is as follows:
1, heating the frame head with a heating device (instant contact with the lens when heated)
2, the frame is wide, wear loose: a hand-held frame, the other hand's index finger, middle finger arrived at the inner surface of the eyebrows at the support, the thumb in the surface of the mirror frame surface push inward to the desired angle to stop.
3, the frame is tight, wearing a sense of pressure: a holding frame, the other holding the temple, gradually outward to the desired angle.
Attention: metal frames can eliminate the heating step. In the second case, the frame is suitable for the frame surface, but the left and right lenses are uneven after the lens is worn, and the concave and convex of the temple can be adjusted.
The adjustment method is as follows:
1. If the right lens is in a higher position after wearing the glasses, turn the right leg up or the left leg down, and vice versa.
2. Heat the lens holder at the head of the frame with a warmer (contact with the lens when heated).
3. Hold a stand with one hand, and hold the temple with the other hand, and gently pull to the desired angle to stop in the desired direction.
Attention: metal frames can eliminate the heating step. In the third case, the frame surface orientation is suitable, but the curvature of the back of the temple is inconsistent with the induction of the ear, and the tightness of the clothing is poor. The length of the bending point of the temple can be adjusted.
The adjustment method is as follows:
1, frame worn on the face to find the desired curved position, make a mark.
2. Heat the vertical bend with a heat dryer and straighten.
3. One hand is fixed on the top, the other hand's thumb finger is placed on the required bending point, the index finger and middle finger are placed on the upper side of the bending point, and the bending point of the temple is bent downwards. Warmly touch the ear. After wearing: After wearing the glasses for a period of time, the frames will appear distorted and loose. With the deformation of the frame, the wearer may appear blurred, visual deformation, dizziness, visual fatigue, and so on, so the need for regular adjustments to the glasses.
Details: Use matters needing attention 1, his hands pick to wear glasses, long one-handed pick to wear glasses easy to make glasses deformed; 2, do not wear glasses when doing strenuous exercise, to avoid being bump caused by deformation; 3, sleeping or lying on the table when Remove the glasses to avoid deformation of the glasses; 4, use a special lens cloth to wipe the glasses, can also be cleaned with water and detergent. Avoid the use of paper towels, handkerchiefs or wipe with clothes; 5. Do not put the glasses in a hot environment above 50 degrees (such as sauna, car windshield), to avoid accelerated lens film falling or aging frames; 6, not often Deformation of the memory material is demonstrated so as not to break the connection or the soldered part. In addition, the memory material will lose the memory function in the environment below -10 degrees, which is the bending will also produce fracture and deformation; 7, people who are allergic to the metal should choose to compose the material frame or put the anticorrosive sleeve on the metal temple. Avoid skin contact with metal; 8. Glasses should be placed in the case when not worn.
This information comes from China Glasses Trading Network:, Contact Phone
Nonwoven Isolation Gown,Medical Disposable Clothing,Nonwoven Isolation Clothing,Nonmedical Disposable Clothing
Jinzhou City Hejin Clothing CO.,Ltd , https://www.hejin-cloth.com