Pc Distribution Frequently Asked Questions and Precautions (2)

color

1. General requirements use CMYK mode, RGB mode can not be used, RGB will automatically change to CMYK mode after the software system will change, and the original use of different colors, such as RGB30% black corresponds to C23 M18 Y18 K0, especially for monochrome In particular, files cannot have RGB colors.

2. When publishing, pay attention to the problem of color overprinting. Normally black is the default overprinting. If other color Plates need to be overprinted, the graphics and texts can be selected at the same time in the advanced printing options.

3. White objects cannot be overprinted, because overprinted objects cannot break through the background color, white does not exist as a color, if the white background does not exist if the background color is not broken, the general file if there is a white suite of objects, There will be a warning in the print, but some files are not prompted. Please check during the operation.

Monte

System problems

1. Start Montessori, must be displayed as the standard version can be issued, if it shows the popular version, it proves that no dog can be detected, you need to restart the computer, if the restart is still popular version, please check whether the dongle is installed or loose .

2. Install the Metso printer. The default machine is AGFR1000. After installation, set the printer. Note that the resolution is 2400, the page is customized, and the port FILE outlet frequency is 175.

3. After the installation of the Monte Carlo software is completed, the Monterey PS font must be installed. If it is a copy version, you must use the font in the FONT folder to authenticate the font.

Check the file

1. The software checks whether the font or picture is bad if the check font and check picture are selected in the option. In addition, 3.22 doesn't provide this function. You need to use 5.0 to check the font and picture.
2. Check if the picture is damaged with high resolution. If the picture is damaged and the RIP cannot be read normally, copy the picture again.

3. Note that checking for black text, such as black, is a black overprint, which is quick and easy to check or change by the format defined in the paragraph text format.

4. If the bar code is a picture, check whether there is a white block under the bar code, otherwise the color will not be broken.
5. If there is a corner line, check if the corner line is four-color. If the corner line cannot be selected, it will be in the parent page. Note whether there are multiple parent pages in the file.

6. There is an "exclusive or" in the padding option of Monte Can't be used, only the "overlay" padding can be selected.

7. Pinyin's Mongolian file Note Pinyin can not be English fonts, (such as ag is obviously wrong), and Simplified Chinese should pay attention to all, there is the best traditional call to ask the customer.

8. Mongolian documents for some text (such as Chinese new Wei, not reported poor words, and replaced with another font, simplified and traditional.

9. There are some systematic words such as Times New Roman in the Mongolian file, but there are in the font.

10. If paper is selected in the Mongolian file, if page 22 is used in the left and right direction, the page display or single page cannot be selected.

Print

1. If you want to clearly publish directly or use the publishing function, if you use the publishing function, you must clearly order the arrangement. If the customer generates the publication file (*.pub), you can directly take the publication document. Note that sometimes the publication document is invalid, and Choreography.

2. Note that changing the dot frequency (number of lines) is best changed in the printer settings. If you change in the print options, be careful to change the page settings and color separation options. Otherwise, it is invalid.

3. If there is a fold (*.imp), pay attention to whether the handoff and the file correspond, pay attention to whether there is a blank page, the bleeding is correct, if the binding method is saddle stitching, pay attention to look at the preview, preview content and files and fold The hand is the same, because it has repeatedly used the saddle stitch after the preview content is different from the folding hand.

4. Use the publishing function to publish, arrange or complete the publication file, you can only click the print option, if you click on the re-layout page number options will cause the content to change, and re-arrangement can not be changed over, need to be careful operation.

5. If you use the imposition function in Montessori and must carry the system cutting line, you must ensure that the page position is the upper left, this belongs to the software automatically, the system cutting line can only be in the upper left, if you need to adjust the page position, only by adjusting the page Margins are implemented, if there is no need for system cutting lines, this problem does not exist.

6. If the document is a page, you will need to change it to a single page in the publication. If you do not change it, there may be more than one piece of content on the margin. Although it will not affect the film, it should pay attention to the layout of the film.

7. Sometimes documents are printed with the general version, RIP can not explain, but can explain with the publication, this is a bug of the software, so you should pay attention to flexibility when printing.

(to be continued)

Ceramic Plate

Linkand Co., Ltd. , http://www.csceramics.com