Text content
1. The use of graphic arts without conversion to curves, especially for documents with more text and paragraph text, is very likely to result in word-dropping, and should be converted into curves when publishing.
2. If the text content is typed in the full-angle state, the RIP can not be interpreted. If the text is entered, the only way is to delete the space or re-enter the text. If the system font is corrupted, the space will be formed and the font will not be reported. Sometimes the artwork text has spaces, but it can be converted to a curve, which can only be checked in normal view mode.
3. Use paragraph text. Before posting, you should check whether the text of the paragraph is exhausted. Is there any text content hidden by the text box?
4. Fonts with -GB2312 cannot be used. Such fonts will be hollowed out at the intersection of the strokes after conversion into curves, and some fonts such as Founder and Meishi will not be converted into curves.
5. The system sometimes misrepresents the difference, but after the file is opened, the save button is grayed out, indicating that the font is not readable.
6. When the text of the artwork is transferred to the curve, the crash sometimes occurs. This is generally due to the fact that there is an artwork text in the precise frame cutting.
7. Cannot use RGB in coreldraw8
Image content
1. The use of non-Tif format pictures or pictures after rotation, is likely to cause broken or picture on the cable, the solution is to convert the file into a bitmap after finishing the file, pay attention to the color mode in the conversion, resolution options In addition, anti-aliasing compensation is not optional, otherwise there will be a virtual edge at the edge of the picture. The color mode is generally gray-scale CMYK32 bits, and the resolution is not lower than the original picture.
2. If the file is exported to a picture in CorelDraw, a layer of channels will need to be deleted in photoshop before it can be used normally.
3. CorelDraw8.0 grayscale image is generally imprinted Please note that it is necessary to change to CMYK bitmap layout.
4. If there is a linked picture in the file, be sure to transfer the picture, otherwise it will break even if it is not rotated.
Effect
1. The use of effects such as filters, transparency, etc. in CorelDraw may result in loss of effect if issued directly. Only conversion into bitmaps can be used normally and will generally have no effect on the results.
2. All gradient effects are filled. If you use a square gradient fill, you must convert it into a bitmap before you can use it. Otherwise, it will become a flat screen. This is a BUG of the software.
3. If the artwork uses gradients, transparency, filters, etc., the text must first be converted to a curve. If you use the effect and then change, it will change or lose, so pay special attention to the curve.
4. If you use the frame to cut the effect precisely, you must pay attention to the option to lock the content, otherwise the content in the image will change when you move it.
5. Use drop-shadow If you need to convert to bitmap layout, you must pay attention to select the object and shadow at the same time and then convert, otherwise the shadow will be automatically deleted, for this, the software system will normally prompt a warning in the conversion Be careful when you notice any changes.
6. When multiple objects are selected at the same time or converted into a bitmap, pay attention to whether these objects are at the same level and whether the group will change the level of the converted objects.
(to be continued)