Patent name reciprocating open preform or molded bottle take-out device Patent applicant Cai Guisen Principal applicant Address 318020 Huangyan District No. 471, Huangyan District, Taizhou City, Zhejiang Province Hong Zhen Polyester Machinery & Mould Co., Ltd. Inventor Cai Guisen Application (patent) No. 200410018430.2 Application Date 2004.05.13 Certification Date Approval Notice No. 1695925 Auditing Notice Date 2005.11.16 Instruction CD No. D0546 Main Classification No. B29C49/42 Classification No. B29C49/42; B29C49/70 Division Original Application No. Priority Abstract Reciprocating Open The preform or shaped bottle take-off device has a set of template seats. The open and close type mold cylinders are mounted in the form blocks. The open and close mold cylinders drive two templates of A and B. The feature is that the reciprocating movable plates are installed on the top of the form blocks. One end of the board is connected with power, and the other end of the reciprocating board is connected with an open plastic preform or a molding bottle holding mechanism. The take-off device is taken from the open plastic preform or the molding bottle holding mechanism to the plastic preform, and then transferred to the mold, and the made-up bottle can be taken out of the mold and unloaded, and can also be clamped. Bottle blowing to achieve automated production. Its main feature is a translational reciprocating movement, the structure is simple; Second, the center of the delivery device is always consistent with the mold center of the template seat, with the template seat movement, can achieve multi-station processing; Third, the delivery device is independent; Fourth, the open-type plastic preform or molded bottle clamping mechanism has many technical solutions and is easy to implement. Sovereign item 1, reciprocating open preform or shaped bottle take-off device, there is a set of template seats (1), open and close mold cylinders (4) are installed in the form blocks, and open and close mold cylinders are used to drive two templates of A and B (2 (3) It is characterized in that the reciprocating movable plate (8) is mounted on the template base (1), one end of the reciprocating movable plate (8) is connected to the power (6), and the other end of the reciprocating movable plate (8) is connected to the open type plastic Preform or molded bottle holding mechanism. International Application International Publication Entering Country Date Patent Agency Zhejiang Hangzhou Jintong Patent Office Co., Ltd. Agency Address Agent Chen Xiangqun Wang Guanming